Current File : //proc/self/root/lib/python2.7/site-packages/ansible/modules/core/network/cumulus/cl_interface.py
#!/usr/bin/python
# -*- coding: utf-8 -*-
# (c) 2016, Cumulus Networks <ce-ceng@cumulusnetworks.com>
#
# This file is part of Ansible
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with Ansible. If not, see <http://www.gnu.org/licenses/>.
DOCUMENTATION = '''
---
module: cl_interface
version_added: "2.1"
author: "Cumulus Networks (@CumulusNetworks)"
short_description: Configures a front panel port, loopback or
management port on Cumulus Linux.
description:
- Configures a front panel, sub-interface, SVI, management or loopback port
on a Cumulus Linux switch. For bridge ports use the cl_bridge module. For
bond ports use the cl_bond module. When configuring bridge related
features like the "vid" option, please follow the guidelines for
configuring "vlan aware" bridging. For more details review the Layer2
Interface Guide at U(http://docs.cumulusnetworks.com)
options:
name:
description:
- Name of the interface.
required: true
alias_name:
description:
- Description of the port.
ipv4:
description:
- List of IPv4 addresses to configure on the interface.
In the form I(X.X.X.X/YY).
ipv6:
description:
- List of IPv6 addresses to configure on the interface.
In the form I(X:X:X::X/YYY).
addr_method:
description:
- Address method.
choices:
- loopback
- dhcp
speed:
description:
- Set speed of the swp(front panel) or management(eth0) interface.
speed is in MB.
mtu:
description:
- Set MTU. Configure Jumbo Frame by setting MTU to I(9000).
virtual_ip:
description:
- Define IPv4 virtual IP used by the Cumulus Linux VRR feature.
virtual_mac:
description:
- Define Ethernet mac associated with Cumulus Linux VRR feature.
vids:
description:
- In vlan-aware mode, lists VLANs defined under the interface.
mstpctl_bpduguard:
description:
- Enables BPDU Guard on a port in vlan-aware mode.
mstpctl_portnetwork:
description:
- Enables bridge assurance in vlan-aware mode.
mstpctl_portadminedge:
description:
- Enables admin edge port.
clagd_enable:
description:
- Enables the clagd daemon. This command should only be applied to
the clag peerlink interface.
clagd_priority:
description:
- Integer that changes the role the switch has in the clag domain.
The lower priority switch will assume the primary role. The number
can be between 0 and 65535.
clagd_peer_ip:
description:
- IP address of the directly connected peer switch interface.
clagd_sys_mac:
description:
- Clagd system mac address. Recommended to use the range starting
with 44:38:39:ff. Needs to be the same between 2 Clag switches.
pvid:
description:
- In vlan-aware mode, defines vlan that is the untagged vlan.
location:
description:
- Interface directory location
default:
- '/etc/network/interfaces.d'
requirements: [ Alternate Debian network interface manager - \
ifupdown2 @ github.com/CumulusNetworks/ifupdown2 ]
notes:
- As this module writes the interface directory location, ensure that
``/etc/network/interfaces`` has a 'source /etc/network/interfaces.d/\*' or
whatever path is mentioned in the ``location`` attribute.
- For the config to be activated, i.e installed in the kernel,
"service networking reload" needs be be executed. See EXAMPLES section.
'''
EXAMPLES = '''
# Options ['virtual_mac', 'virtual_ip'] are required together
# configure a front panel port with an IP
cl_interface: name=swp1 ipv4=10.1.1.1/24
notify: reload networking
# configure front panel to use DHCP
cl_interface: name=swp2 addr_family=dhcp
notify: reload networking
# configure a SVI for vlan 100 interface with an IP
cl_interface: name=bridge.100 ipv4=10.1.1.1/24
notify: reload networking
# configure subinterface with an IP
cl_interface: name=bond0.100 alias_name='my bond' ipv4=10.1.1.1/24
notify: reload networking
# define cl_interfaces once in tasks
# then write interfaces in variables file
# with just the options you want.
cl_interface:
name: "{{ item.key }}"
ipv4: "{{ item.value.ipv4|default(omit) }}"
ipv6: "{{ item.value.ipv6|default(omit) }}"
alias_name: "{{ item.value.alias_name|default(omit) }}"
addr_method: "{{ item.value.addr_method|default(omit) }}"
speed: "{{ item.value.link_speed|default(omit) }}"
mtu: "{{ item.value.mtu|default(omit) }}"
clagd_enable: "{{ item.value.clagd_enable|default(omit) }}"
clagd_peer_ip: "{{ item.value.clagd_peer_ip|default(omit) }}"
clagd_sys_mac: "{{ item.value.clagd_sys_mac|default(omit) }}"
clagd_priority: "{{ item.value.clagd_priority|default(omit) }}"
vids: "{{ item.value.vids|default(omit) }}"
virtual_ip: "{{ item.value.virtual_ip|default(omit) }}"
virtual_mac: "{{ item.value.virtual_mac|default(omit) }}"
mstpctl_portnetwork: "{{ item.value.mstpctl_portnetwork|default('no') }}"
mstpctl_portadminedge: "{{ item.value.mstpctl_portadminedge|default('no') }}"
mstpctl_bpduguard: "{{ item.value.mstpctl_bpduguard|default('no') }}"
with_dict: cl_interfaces
notify: reload networking
# In vars file
# ============
cl_interfaces:
swp1:
alias_name: 'uplink to isp'
ipv4: '10.1.1.1/24'
swp2:
alias_name: 'l2 trunk connection'
vids: [1, 50]
swp3:
speed: 1000
alias_name: 'connects to 1G link'
##########
# br0 interface is configured by cl_bridge
##########
br0.100:
alias_name: 'SVI for vlan 100'
ipv4: '10.2.2.2/24'
ipv6: '10:2:2::2/127'
virtual_ip: '10.2.2.254'
virtual_mac: '00:00:5E:00:10:10'
'''
RETURN = '''
changed:
description: whether the interface was changed
returned: changed
type: bool
sample: True
msg:
description: human-readable report of success or failure
returned: always
type: string
sample: "interface bond0 config updated"
'''
# handy helper for calling system calls.
# calls AnsibleModule.run_command and prints a more appropriate message
# exec_path - path to file to execute, with all its arguments.
# E.g "/sbin/ip -o link show"
# failure_msg - what message to print on failure
def run_cmd(module, exec_path):
(_rc, out, _err) = module.run_command(exec_path)
if _rc > 0:
if re.search('cannot find interface', _err):
return '[{}]'
failure_msg = "Failed; %s Error: %s" % (exec_path, _err)
module.fail_json(msg=failure_msg)
else:
return out
def current_iface_config(module):
# due to a bug in ifquery, have to check for presence of interface file
# and not rely solely on ifquery. when bug is fixed, this check can be
# removed
_ifacename = module.params.get('name')
_int_dir = module.params.get('location')
module.custom_current_config = {}
if os.path.exists(_int_dir + '/' + _ifacename):
_cmd = "/sbin/ifquery -o json %s" % (module.params.get('name'))
module.custom_current_config = module.from_json(
run_cmd(module, _cmd))[0]
def build_address(module):
# if addr_method == 'dhcp', dont add IP address
if module.params.get('addr_method') == 'dhcp':
return
_ipv4 = module.params.get('ipv4')
_ipv6 = module.params.get('ipv6')
_addresslist = []
if _ipv4 and len(_ipv4) > 0:
_addresslist += _ipv4
if _ipv6 and len(_ipv6) > 0:
_addresslist += _ipv6
if len(_addresslist) > 0:
module.custom_desired_config['config']['address'] = ' '.join(
_addresslist)
def build_vids(module):
_vids = module.params.get('vids')
if _vids and len(_vids) > 0:
module.custom_desired_config['config']['bridge-vids'] = ' '.join(_vids)
def build_pvid(module):
_pvid = module.params.get('pvid')
if _pvid:
module.custom_desired_config['config']['bridge-pvid'] = str(_pvid)
def build_speed(module):
_speed = module.params.get('speed')
if _speed:
module.custom_desired_config['config']['link-speed'] = str(_speed)
module.custom_desired_config['config']['link-duplex'] = 'full'
def conv_bool_to_str(_value):
if isinstance(_value, bool):
if _value is True:
return 'yes'
else:
return 'no'
return _value
def build_generic_attr(module, _attr):
_value = module.params.get(_attr)
_value = conv_bool_to_str(_value)
if _value:
module.custom_desired_config['config'][
re.sub('_', '-', _attr)] = str(_value)
def build_alias_name(module):
alias_name = module.params.get('alias_name')
if alias_name:
module.custom_desired_config['config']['alias'] = alias_name
def build_addr_method(module):
_addr_method = module.params.get('addr_method')
if _addr_method:
module.custom_desired_config['addr_family'] = 'inet'
module.custom_desired_config['addr_method'] = _addr_method
def build_vrr(module):
_virtual_ip = module.params.get('virtual_ip')
_virtual_mac = module.params.get('virtual_mac')
vrr_config = []
if _virtual_ip:
vrr_config.append(_virtual_mac)
vrr_config.append(_virtual_ip)
module.custom_desired_config.get('config')['address-virtual'] = \
' '.join(vrr_config)
def build_desired_iface_config(module):
"""
take parameters defined and build ifupdown2 compatible hash
"""
module.custom_desired_config = {
'addr_family': None,
'auto': True,
'config': {},
'name': module.params.get('name')
}
build_addr_method(module)
build_address(module)
build_vids(module)
build_pvid(module)
build_speed(module)
build_alias_name(module)
build_vrr(module)
for _attr in ['mtu', 'mstpctl_portnetwork', 'mstpctl_portadminedge',
'mstpctl_bpduguard', 'clagd_enable',
'clagd_priority', 'clagd_peer_ip',
'clagd_sys_mac', 'clagd_args']:
build_generic_attr(module, _attr)
def config_dict_changed(module):
"""
return true if 'config' dict in hash is different
between desired and current config
"""
current_config = module.custom_current_config.get('config')
desired_config = module.custom_desired_config.get('config')
return current_config != desired_config
def config_changed(module):
"""
returns true if config has changed
"""
if config_dict_changed(module):
return True
# check if addr_method is changed
return module.custom_desired_config.get('addr_method') != \
module.custom_current_config.get('addr_method')
def replace_config(module):
temp = tempfile.NamedTemporaryFile()
desired_config = module.custom_desired_config
# by default it will be something like /etc/network/interfaces.d/swp1
final_location = module.params.get('location') + '/' + \
module.params.get('name')
final_text = ''
_fh = open(final_location, 'w')
# make sure to put hash in array or else ifquery will fail
# write to temp file
try:
temp.write(module.jsonify([desired_config]))
# need to seek to 0 so that data is written to tempfile.
temp.seek(0)
_cmd = "/sbin/ifquery -a -i %s -t json" % (temp.name)
final_text = run_cmd(module, _cmd)
finally:
temp.close()
try:
_fh.write(final_text)
finally:
_fh.close()
def main():
module = AnsibleModule(
argument_spec=dict(
name=dict(required=True, type='str'),
ipv4=dict(type='list'),
ipv6=dict(type='list'),
alias_name=dict(type='str'),
addr_method=dict(type='str',
choices=['', 'loopback', 'dhcp']),
speed=dict(type='str'),
mtu=dict(type='str'),
virtual_ip=dict(type='str'),
virtual_mac=dict(type='str'),
vids=dict(type='list'),
pvid=dict(type='str'),
mstpctl_portnetwork=dict(type='bool', choices=BOOLEANS),
mstpctl_portadminedge=dict(type='bool', choices=BOOLEANS),
mstpctl_bpduguard=dict(type='bool', choices=BOOLEANS),
clagd_enable=dict(type='bool', choices=BOOLEANS),
clagd_priority=dict(type='str'),
clagd_peer_ip=dict(type='str'),
clagd_sys_mac=dict(type='str'),
clagd_args=dict(type='str'),
location=dict(type='str',
default='/etc/network/interfaces.d')
),
required_together=[
['virtual_ip', 'virtual_mac'],
['clagd_enable', 'clagd_priority',
'clagd_peer_ip', 'clagd_sys_mac']
]
)
# if using the jinja default filter, this resolves to
# create an list with an empty string ['']. The following
# checks all lists and removes it, so that functions expecting
# an empty list, get this result. May upstream this fix into
# the AnsibleModule code to have it check for this.
for k, _param in module.params.items():
if isinstance(_param, list):
module.params[k] = [x for x in _param if x]
_location = module.params.get('location')
if not os.path.exists(_location):
_msg = "%s does not exist." % (_location)
module.fail_json(msg=_msg)
return # for testing purposes only
ifacename = module.params.get('name')
_changed = False
_msg = "interface %s config not changed" % (ifacename)
current_iface_config(module)
build_desired_iface_config(module)
if config_changed(module):
replace_config(module)
_msg = "interface %s config updated" % (ifacename)
_changed = True
module.exit_json(changed=_changed, msg=_msg)
# import module snippets
from ansible.module_utils.basic import *
import tempfile
import os
if __name__ == '__main__':
main()
Mini Shell